Loading... Please wait...

Heavy Glass Frameless Shower

Custom Heavy Glass Frameless Shower Enclosures will turn the ordinary bath room into the extraordinary.

Each piece of 3/8" safety tempered glass is cut to your specific needs and design.

We offer unmatched lead times and competitive pricing.

All estimates are free.

With over 20 years of experience we will work with you to provide expert design assistance for your job.

We will meet with you in your home or in our showroom conviently located in Middletown. 

 Look in our gallery for more pictures of our shower doors.

Four Commonly Required Repairs:

1. Door Alignment

After years of use the shower door has a tendency to get out of alignment and start making contact with other surfaces. If not corrected door glass breakage is the most common result.

2. Corroded Cover Plate or Screws

Because of hard water or improper cleaning, interior cover plates and screws have a tendency to become dull or corroded over a period of time. Replacement will bring back the original luster.

3. Door Handles or Knobs

Alkaline, rings, and wear and tear will take away the newness and luster of the handle or knob over a period of time. A simple replacement of the handle or knob brings the shower back to life.

4. Seals and Wipes

As good as seal technology has become, over time the water seal or wipe will deteriorate or become brittle and allow leakage. Removing and replacing these seals will minimize water leaks and bring the shower back to it's original condition.

Warranty Information: All C. R. Laurence Company (which are the ones we use) Frameless Shower Door Hinges are warranted against mechanical and finishing defects for a period of three years from the date of purchase. Hardware that is damaged due to improper cleaning will immediately become exempt from the warranty.

Hardware and Glass Maintenance Guidelines:

Hardware:

Following simple preventative maintenance steps will enhance the beauty and functionality of your hinges.

Your hinges are greased at the factory for quiet, trouble-free operation. However, if squeaking occurs after installation we suggest the use of 3 in 1 oil. Do not use lubricating sprays such as WD40.

Never use an abrasive cleaner (such as Comet Cleanser or a similar product) on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Drying the hardware with a clean, soft towel on a daily basis is the best way to maintain it.

If mineral deposits form, mix a couple drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Clean the hardware using a soft, non-abrasive cloth. Rinse throughly with clean, warm water and dry.

Glass: It is of equal importance to maintain the glass.

Neglected glass will accumulate water spots, which will eventually turn into mineral deposits.

The best way to keep the glass clean is to squeegee the glass after each shower.

By following these simple maintenance guidelines you will greatly extend the life of the hardware and glass. 


Powered By:
Network Louisville.com (NetLou.com)
Making websites easy and affordable!
502-569-WEBS (9327)